가연성 가스감지기
단일 가스측정기 ToxiRAE Pro CO2
본문
- The ToxiRAE Pro CO2 is the world’s first wireless personal carbon dioxide monitor. It provides safety professionals with wireless remote access to real-time instrument readings and alarm status for better visibility and faster incident response.
- The ToxiRAE Pro offers datalogging capability and is equipped with a “Man Down” alarm and policy enforcement to ensure greater safety while making sure compliance-related procedures such as periodic testing and calibration are performed.
- Wireless access to real-time instrument readings and alarm status from any location
- Unmistakable five-way local and remote wireless notification of alarm conditions
- Intelligent sensor stores calibration data, so it can be swapped in the field
- Largest display in its class
- Continuous datalogging
- Easy to use
- Reliable and rugged
- Chemical manufacturing
- Food and beverage
- Wineries and breweries
- Landfills
- Water and wastewater facilities
- Wireless remote monitoring enhances worker safety
- Man Down Alarm with real-time wireless remote notification
- Easy to maintain, with replaceable sensor, filter, and Li-Ion battery
- Fully automatic bump testing and calibration with AutoRAE 2
- ToxiRAE Pro CO2 monitor with sensor as specified, alligator clip, protective rubber boot, and rechargeable battery installed
- Charging and PC communication cradle
- PC communication cable
- AC adapter (100 to 240 V, 50/60 Hz AC to 12 V DC)
- Calibration adapters
- Quick Start Guide
- CD with documentation
- ProRAE Studio II software for PC-based instrument configuration and data management
- Calibration card, quality certificate, and warranty/registration card
| Size | 4.6" H x 2.4" W x 1.2" D (118 x 60 x 30 mm) |
|---|---|
| Weight | 7.76 oz. (220 g) |
| Sensor | Nondispersive infrared sensor Range: 0 to 50,000 ppm Resolution: 100 ppm |
| Battery | Rechargeable Li-ion battery |
| Display | Graphical LCD display with white LED backlighting (activated when monitor is in alarm or with a button press) |
| Display Readout | - Real-time reading of gas concentrations in parts per million (ppm); |
| Keypad | 2 buttons for operation and programming |
| Sampling | Diffusion |
| Calibration | Automatic with AutoRAE 2 Test and Calibration System or manual |
| Alarm Modes | - Wireless remote alarm notification; audible (95 dB @ 30 cm), vibration, visible alarm (flashing |
| Datalogging | - Continuous datalogging with a three-month capacity (at one-minute intervals) - User-configurable datalogging interval (from 1 to 3,600 seconds) |
Communication and Data Download |
- Data download and instrument setup on PC via charging and PC comm. cradle |
| Wireless Network | ProRAE Guardian Real-Time Wireless Safety System or Closed-Loop Network with the EchoView Host |
| Wireless Frequency | ISM license-free bands |
Wireless Range (Typical) |
ToxiRAE Pro to Mesh Router or EchoView Host ~ 660 feet (200 meters) ToxiRAE Pro to RAELink3 Mesh or RAELink3 Z1 Mesh modems ~ 330 feet (100 meters) |
| Operating Temperature | -4° to 131° F (-20° to 55° C) |
| Humidity | 0% to 95% relative humidity (non-condensing) |
Dust and Water Resistance |
IP-65 |
Hazardous Location Approvals |
Unit cannot be used in hazardous area |
CE Compliance (European Conformity) |
EMC directive: 2004/108/EC. R&TTE directive: 1999/5/EC |
| Warranty | - Two years on non-consumable components - One year on all other sensors, battery, and other consumable parts |
1 Wireless units have a functioning RF modem and are ready for wireless deployments. Non-wireless units cannot be upgraded to wireless. Additional equipment and/or software licenses may be required to enable remote wireless monitoring and alarm transmission.
Specifications are subject to change
